JSW J450DS-1400H Electric Injection Molding Machine (2020)
Brand: JSW
Model: J450DS-1400H
Type: All Electric Servo Drive Injection Molding Machine
SN: MM191403
Mfg Date: March 2020
Controller: JSW Syscom5000i
Run Time: 5894 hours
Total Cycles: 447864

Injection Unit:
Screw Model: A
Screw Diameter: 2.99 in (76 mm)
Screw Stroke: 11.811 in (300 mm)
Theoretical Injection Capacity: 83.06 in3 (1361 cm3)
Injection Capacity (GP-PS): 43.7 oz (1238 g)
Injection Pressure (max): 27560 psi (190 Mpa)
Holding Pressure (max): 24800 psi (171 Mpa)
Injection Speed: 19.69 in/s (500 mm/s)
Injection acceleration: 1.5 G
Injection rate: 138.4 in3/s (3.79 cm3/s)
Plasticizing rate (GP-PS): 3.79 az/s (386 kg/hr)
Screw Rotation speed: 240 rpm/min
Nozzle touch force: 8.8 U.S.ton (78.5 kN) Hyd. Center Touch
Nozzle stroke from Platen: 1.97 in (50 mm)
Barel Temperature Control: Barrel 5 Nozzle 1
Heater Wattage: 50.1 (H1/H2 Ceramic Heater) kW

Clamping Unit:
Clamp mechanism: Double Toggle
Clamping force: 496.8 U.S.ton (4420 kN)
Daylight: 66.93in (7100mm)
Mold open stroke: 31.50 in (800mm)
Platen open/close speed: High Speed
Platen design: Standard
Movable platen support: Linear Guide
Mold height: 13.780 in~35.434 in (350mm~900mm)
Distance between Tie bars: 35.43in x 31.87in (900mm x 810mm)
Platen size (HxV): 51.18 in x 47.64 in (1300mm x 1210mm)
Ejector points: 17
Ejector force: 11.13 U.S.ton (99.0 kN)
Ejector stroke: 7.078 in (180 mm)

Machine weight: 28.22 U.S.ton (25.6 t)
Machine size (LxWxH): 28.28ft x 6.89ft x 7.25ft